Year 2017
Serial # 117D-50483-1
Front line drill, mine closure.
Currently in workshop for thorough cleaning, repairs, Maintenance and full service.
Drill is in working order.
All Equipment for Hire
Sandvik DD421-60C – Twin Boom Drill Rig – Year 2017 – Unit # 95
Serial # 117D 42009-1
Year 2017
Showing The Following Hours:-
Diesel Engine – 4800
Percussion # 1 – 386
Percussion # 2 – 538
Compressor – 5670
Electric Power Pack #1 – 8344
Electric Power Pack #2 – 5761
Fitted with:-
2 x RD525 Hydraulic Rock Drills (Drifters)
2 x 10/16 Split Feeds
Front Laser operator safety control
Drill Water Suction Pump – 1000 Volt
Drill has recently been serviced & repairs carried out, with zero hours worked.
- Re-Commissioned under 1000 Volt Power
- Entire Machine has been thoroughly cleaned.
- “A” Cabinet 1000 Volt Electrics inspected.
- Both Left & Right Outer Booms Replaced with re-furbished booms, including new Brass Wear Plates fitted
- All Engine & Hydraulic Oils/filters replaced
- All worn Hydraulic Hoses replaced from front of boom to rear of machine (sizes 1/4″, 1/2″. 3/4″ & 1″)
NOTE: Drill can be professionally painted if requested (at additional cost)
Drill is in very good/original condition.
Inspections welcome … can be inspected under 1000 Volt Power in our Workshop.
Atlas Copco ROC D9 – 01 RRC – Drill Rig – Year 2008 –
AVAILABLE TODAY FOR IMMEDIATE DRY HIRE WORKS OR AVAILABLE FOR SALE.
ATLAS COPCO ROC D9-01 RRC – DRILL RIG
Serial # AV0o8A1596/8992005984
Engine Hours Showing 7,480 frame hrs
Percussion Hours Showing 2,959
VERY Good Condition
Available for wet or dry hire
Ideal for Tunnel or surface drilling-
Benching ,soil nails ,line drilling, unstable ground and demolition works.
Eliminates dangerous working conditions (without having operator in cab of drill). Possibly only drill of this kind working in Australia.
Dust collector, fire suppression system, hand rails, full radio remotes,
7 drill rod carousel fitted , can drill up to 30 meters a hole with full automation
Ideal for tunnel works , Soil Nails , shaft sinking,
Sandvik DD311-40c – Drill Rig (Year 2014) – Unit #76
Sandvik DD311-40c Drill Rig (Year 2014)
Diesel Engine Hours: 1129 (showing)
Compressor Hours: 415 (showing)
Percussion Hours: 991 (showing)
Fitted with
– Split Feed Rail
– Pito Jaws
– HLX5 Drifter
– 1000vlt
Late Model Low hour drill
Ideal for small mine development, tunnel cross passage excavation , shaft work , Mine rehab work.
Available for Sale or Long-Term Hire
Tamrock Commando 300 – Year 2004 – Unit # 91
Tamrock Commando 300 – Unit # 91
Year 2004
Engine Hours – 3214 Hours
Fittted With:-
New HL300 Drifter
360o Roll Over
Fire Suppression
New & Refurbished Hydraulic Cylinders
4 Metre Feed Rail – Fitted with Pito Jaws
Re-Hosed (Hydraulic)
Jacon MX-0400SC – Shotcrete Rig – Year 2011 – Unit #96
Serial # 90494700886718
Starter Isolator
Battery Isolator
Reversing Camera
E-Stops
Fire Suppression
Remote Control Unit
Work Lights
Stabilizers
904 Mercedes Engine
Low Hour Components – Engine & Cooler Pack (approx 1150 hours)
P1 & P2 Axles (approx 192 Hours)
P1 Drive Motor (approx 486 Hours)
P2 Drive Motor (approx 604 Hours)
Sandvik Monomatic DHS 105A (Monomatic DH105C) UNIT # 99
Machine Identification Details:’
Sandvik Monomatic DHS 105A
Serial # 93D795A
Year 1992
ROPS: # 6593127TPA65
Sandvik Machine Identification Noted on machine – Monomatic DH105C
Single Boom Diesel/Hydraulic Drill Jumbo
Ideal for Mine/Tunnel Works
Jacon Midget MK4.5 – Shotcrete Spray Rig – Unit # 77
Jacon Midget MK4.5 – Shotcrete Spray Rig
CAT C4.4 Engine
Fire Suppression
Serial/VIN # MJ 4.5 – 1108-159
Carrier Built Date – 10/2011
Spray Boom Built Date – 2013
Currently in workshop for repairs & servicing
Available For Hire or For Sale
SANDVIK AXERA DO7-260 – TWIN BOOM DRILL RIG – (Year 2004) UNIT # 86
Year: 2004
PIN/Chassis No: 704001
ID Code: 55036973
Serial # 104D6984-1
Body Type: TC 7W Jumbo 9 Twin Production Drill
Hours Showing: 2473
Fire Suppression
E-Stops
Both – HLX5 Drifters Have been removed, re-conditioned and re-fitted and are being sold with drill with zero hours worked.
Ideal for Tunnel Excavation Works
Axera 260 / TB60 10/16 feeds .
Available for Dry or Wet hire .
For Sale
Hard to find TB 60 Boom Drill Good to Go
Sandvik 621 – LHD – Loader (Year 2007) Unit # 85
Refurbished 10m3 Bucket Fitted.
Full History On Loader:-
Most Major Components replaced EG: Transmission, Engine Lift Steering Cylinders, Hydraulic Cylinders. Full Report of all change out parts available on request.
Ideal for Small Contract or Back Up Loader.
Well maintained.
No Oil Leaks visible
